Sipura SPA2000, SPA2002, SPA2100, SPA3000, SPA3001:

Sipura SPA2000

Sipura SPA2100

Sipura SPA3000

STEP 1

You must first determine what IP address it received. To do this, you need to pick up the phone attached to the Line 1 jack and

dial: (four asterisks)
then dial: 110 #

and you will be told the IP address of your device
(e.g. 192.168.0.100)

-

STEP 2
Go to any browser equipped computer on your network and enter the address:

http://<IP ADDRESS>/

(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1).

-

STEP 3
Click on the "Admin Login" button near the top right side of the screen, then click on the
"Line 1" tab.





-

STEP 4
You need to modify from the factory default. Settings are listed here:

Proxy: sip.nettalk.com
Display Name: Enter your full name, User ID or leave blank
User ID: Account Number provided on CONNECT
Password: Account SIP Password provided on CONNECT
Register Expires: 300
Preferred Codec: G711 or G729 will work

SIP Configuration
Was this article helpful?
Cancel
Thank you!