Gigaset C530 IP:

Gigaset C530 IP

STEP 1

You need to obtain the IP address of the base station. You can get this information from your handset by selecting:

Menu→Settings→Base→Local Network→(enter your system pin – default is 0000).

-

STEP 2

Go to any browser equipped computer on your network and enter the address: http://<IP ADDRESS>/
(where <IP ADDRESS> is replaced by the address that was given to you in STEP 1).

-

STEP 3

Go to Settings -> Telephony -> Connections -> IP1

You will need to configure the following information from factory default:

Authentication Name: Account Number provided on CONNECT
Authentication Password: Account SIP Password provided on CONNECT
Username: Account Number provided on CONNECT
Display Name: Your name, Account Number, or leave blank

Domain: sip.nettalk.com
Proxy Server Port: 5060
Registration Server: sip.nettalk.com
Registration Server Port: 5060
Registration Refresh Time: 300

STUN Enabled: NO
Outbound Proxy Mode: Auto
Outbound Server Address: sip.nettalk.com
Outbound Proxy Port: 5060

SIP Configuration



STEP 4

Set your new account settings. Under IP1 you should see "Registered" and "Active" checked off.



STEP 5 (optional)

If you have multiple netTALK accounts, repeat STEP 3 for IP2-IP6. Use SIP Ports 5085 or 7060 if additional accounts do not work on 5060.
Was this article helpful?
Cancel
Thank you!